現在在模型制作圈中逐漸出現一種新型的動態水模型，動態水的加入不但改變了傳統模型的過于靜態，更是打破了模型死水般的氣氛。

Now, a new type of dynamic water model is gradually emerging in the model making circle. The addition of dynamic water not only changes the static state of the traditional model, but also breaks the stagnant atmosphere of the model.

其實動態水沙盤模型主要分為兩個系統部分

In fact, the dynamic water sand table model is mainly divided into two parts

一、流水燈光控制系統，燈光系統是控制營造水流的燈光?？梢酝ㄟ^(guò)彩燈的控制，是有兩個電子開 光開控制似水流的燈光，利用點位控制器來控制閃爍頻率，從而形成彩色水流閃光效果。還有就是利用可編程式控制器，通過內置單片機來實現控制，可以通過預先設計好的編程來控制燈光。更是燈光多點控制，為水流增加色彩生動，從而營造美輪美奐的效果。

1、 Water lighting control system, the lighting system is to control the flow of light. Through the control of color lights, there are two electronic lights to control the water like lights, and the point controller is used to control the flashing frequency, so as to form a color water flash effect. There is the use of programmable controller, through the built-in microcontroller to achieve control, you can control the lighting through pre-designed programming. More is the light multipoint control, increases the color vividly for the water flow, thus creates the magnificent effect.

二、水循環系統，沙盤模型水循環系統部件包括有：上下水管、防水通道、水池、潛水泵、河流等等。

2、 Water circulation system, sand table model, water circulation system components include: upper and lower pipes, waterproof channel, pool, submersible pump, river and so on.

要實現水循環系統先要做好河道或者水池的工作，水池（河道）的區域容器可用防水膠做防水工作。然后在水池（河道）安裝下水道，不過安裝下水道的時候要為下水道做好隱藏工作，可以在安裝在水池地下或者在假山內部安裝。如果供水壓力過大，可以在出水管口做適當?shù)膿跛ぷ?，避免水射程過遠。也可以利用出水口的山石制作泉涌、疊水或者瀑布效果，如果要制作噴泉效果，亦可使用醫用針頭鏈接出水口，從而達到各種噴泉效果。

In order to realize the water circulation system, it is necessary to do a good job in the river or pool. The containers in the pool (River) area can be waterproof with waterproof glue. Then install sewers in the pool (River). However, when installing sewers, do a good job of hiding the sewers. You can install them under the pool or inside the rockery. If the water supply pressure is too high, appropriate water retaining work can be done at the outlet of the water pipe to avoid too long water range. You can also use the rocks at the water outlet to make spring, water or waterfall effects. If you want to make a fountain effect, you can also use a medical needle to link the water outlet to achieve various fountain effects.

這些都是沙盤模型水動態系統的基礎，如果希望水體顯得更加真是，可在水面加上白啦營造浪花或者排浪。為了能夠增加各種生動性，亦可在水面放置各種假山、橋梁、船只、島嶼等等，也可在島嶼或假山下制造倒像或者噴各種雜色。這些效果都可以根據客戶需要而去增加，能夠讓模型添加更過動態效果。

These are the basis of the water dynamic system of sand table model. If you want the water body to be more real, you can add white water on the water surface to create spray or discharge waves. In order to increase all kinds of vividness, various rockeries, bridges, boats, islands, etc. can also be placed on the water surface, and inverted images can be made or variegated under the islands or rockeries. These effects can be added according to the needs of customers, which can make the model more dynamic.